Fi-Shock® 2 Mile AC Low Impedance Energizer
The American-made Fi-Shock® 2 Mile AC Low Impedance Energizer (EA2M-FS) is an excellent choice for containing poultry, pets or other small animals, or for keeping pests out of your lawn or garden. With a two mile range, the EA2M-FS electric fence charger is ideal for powering small fences without a large investment. Because the unit runs on AC power rather than batteries, it requires less maintenance and can be counted on to deliver trouble-free operation in almost any condition. Installation is quick and easy — you can use the EA2M-FS Fi-Shock® electric fence charger with your existing wire fencing, or build a new fence from scratch.
- A low cost solution for electrifying up to two miles of fencing
- Plugs directly into a standard AC (110-120 VAC, 60 Hz, 1VA) electrical outlet
- Produces a reliable pulsating AC current with a 0.07 output Joule rating
- Housed in a weather-resistant cabinet
- One year limited warranty
Ideal for Residential Use
When connected to a standard electrical outlet, the EA2M-FS delivers a pulsating current safe for containing small animals. The Fi-Shock® electric fence charger is excellent for use in homes with pets and smaller farms. When calculating your energizer needs, be sure to account for the fact that the EA2M-FS’s two mile range will be shortened if you are constructing a double- or triple-strand fence. The two mile range is accurate for one strand of wire, in weed-free conditions. Bear in mind that tall grass and weeds can draw power from your fencing and limit its effectiveness.
Built-to-Last Electric Fence Chargers With American Quality
With its rugged weatherproof housing, the EA2M-FS is built for year round use in a variety of conditions. Because the unit has exposed connectors, however, it should be installed in a sheltered location to minimize the risk of damage from rain and snow. The EA2M-FS features a limited one year warranty that covers any manufacturer’s defects as well as damage from lightning.
Grounding the EA2M-FS
Properly grounding the EA2M-FS is a key step during the installation process. Grounding completes the fence’s electrical circuit and causes energy to flow through when an animal comes into contact with it. Grounding clips, rods and insulated wire are sold separately, and they must be installed within 20 feet of the electric fence charger, and more than 50 feet away from any other grounding system.
How to Install an AC (Plugin) Fence Charger
Fi-Shock® Means Leadership in Electric Fence Systems for Animal Containment and Control. Fi-Shock® provides safe, secure, superior quality electric fence products for all your fencing needs.
Fi-Shock® 2 Mile AC Low Impedance Energizer - Specifications
- 2 mile range in ideal conditions
- High-power, low-cost
- Plugs directly into the power outlet with no power cord
- Input Voltage: 110-120 VAC, 60 Hz, 1VA
- Output Joule rating: 0.07
- Pulsating AC current output energizer
- Weather resistant cabinet to protect the circuitry of the charger
- One year limited warranty
The Zareba® Fence Charger Warranty
ZAREBA® SYSTEMS LIMITED WARRANTY
Zareba (Red Snap’r, Blitzer and other energizers made by Woodstream warrants energizers with a mile rating under 20 miles for 12 months (a full year) from the date of purchase (or date or manufacture if proof of purchase is not provided) against defects in materials and workmanship, and from damage caused by lightning.
Energizers with a mile rating of 20 miles and over have a 24 month warranty (two years) total. Energizers with a mile rating of 50 miles or over have a 36 month warranty (three year) when registered on line at the time of purchase.
For any sized energizer, retain your receipt for proof of purchase or register your energizer on line at www.zarebasystems.com immediately after purchase. Also, please reference the web page for a list of Authorized Repair Centers and instructions on returning fence controllers for service.
Energizers which come equipped with the Storm Guard lightning protection module are warranted only when the Storm Guard is properly being used on the fencer.
TERMS APPLICABLE TO BOTH 30-DAY RETURN POLICY AND THE LIMITED WARRANTY
Neither the 30-day return policy nor the limited warranty applies to any defect caused by improper installation, misuse, product alterations, tampering, neglect, or any similar reason not related to product malfunctions or defects in the materials or workmanship of the product. The 30-Day return policy and the limited warranties are given only to the original purchaser of the product and not to any subsequent owners or to any other user or person when installed and used in accordance with the instructions found in the owner’s manual. No person is authorized to grant any warranty additional to or different from this written warranty.
To make a warranty claim, you must contact Woodstream Corp. at 800-800-1819 or www.zarebasystems.com regarding the defective product or parts during the warranty period or contact one of the Authorized Repair Centers listed on www.zarebasystems.com.
If you have not registered your energizer on line immediately after purchase, you may need to provide additional information such as, your name, mailing address, proof of your purchase date, and a description of the problem. If the defect is covered by the limited warranty, Woodstream Corp. or a repair station will repair or replace (at its option) the defective product or parts
NEITHER THE SELLER NOR THE MANUFACTURER SHALL HAVE ANY LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM OR CAUSED BY ANY DEFECT, FAILURE, OR MALFUNCTION OF ANY PRODUCT.
UPON EXPIRATION OF THE 30 DAY RETURN POLICY, NO WARRANTY OR GUARANTEE OTHER THAN THE LIMITED WARRANTY PROVIDED HEREIN IS MADE, EITHER EXPRESS OR IMPLIED. IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH MAY ARISE AT LAW ARE HEREBY EXPRESSLY DISCLAIMED UNLESS STATE LAW PRECLUDES DISCLAIMING THEM IN WHICH CASE THEY ARE LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD.
SOME STATES DO NOT ALLOW LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, EXCLUSION, OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CERTAIN PURCHASERS, SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
SERIAL NUMBER INFORMATION
The serial number for all Woodstream Corp. fence energizers will go to a 10 digit serial number. The format for the 10 digit serial number is as follows:
XX XX XX XXXX
Year Month Day Serial number
If no sales receipt is provided with the return, we will use the date of manufacture.
Please contact Woodstream Corp. for all warranty claims or returns: Woodstream Corp., 69 North Locust Street, Lititz, PA. 17543, 800-800-1819. www.zarebasystems.com
Disclaimer: Zareba® System does not endorse any information contained in product reviews. Please follow all label instructions for your specific use.
Voltage output?This charger has a no-load voltage of approximately 2,000 volts.Date published: 2016-12-15
- All About
All About Electric Fence Chargers
Depending on where you live in this country, the electric fence charger may have a different name. Some areas call chargers electric fence energizers while other areas may call them fencers. Whatever the name, the purpose is to alter the incoming electrical charge into a safer form of electricity. Learn about the different types of electric fence energizers available.
Check out our Electric Fence Advice Page to find out more about your favorite chargers!
Charger Placement Tips
Your charger should be installed in a clean, sheltered location away from direct moisture and sunlight (with the exception of solar powered chargers). It also needs to be accessible to a separate ground rod system from a home or barn.
If you're using an AC charger, the location should be as close to the power source and the electric fence as possible. Even though the charger's enclosure is basically weatherproof, it is advisable to install it indoors or in weatherproof housing.
Be sure to install porcelain tube-type insulators (or equivalent) in the walls of buildings or housings where the fence wires feed through.
Never allow the fence wires to come into contact with objects which may conduct the electric "charge" to ground.
Frequently inspect the area where the charger is installed and maintain it as a clean and dry environment.Learn More Tips »
Fi-Shock® FAQs on Electric Fence Systems
FAQs about Fi-Shock® Chargers
Q: What is an energizer?
A: Often called "Chargers" or "Fencers", the purpose of an energizer is to convert the electrical input from a dangerous charge to an effective and safe electrical charge. The energizer, or charger, lowers Amps and increases volts.
Q: Which charger should I use?
A: There are three questions to ask before this question can be answered:
What power source do I have?
If you can use AC (regular outlet) power, that would be preferred. Other options include DC (Battery powered) or Solar power.
What is the perimeter distance?
Each Fi-Shock® charger has clearly marked on it the range of wire that it will charge. Remember that the range is for one strand of wire, so if multiple strands are being charged then more power is needed.
What animals are being contained or repelled?
Dogs, cats, raccoons etc, are very sensitive to electrical charges and thus need a smaller charger. Predator control as well as sheep and large livestock need more power to help in the training process.
Q: Do I need to protect the charger from the weather?
A: Yes. Follow the instruction on each charger. Solar units obviously need direct sun light and need to face the sun for best results.
Have questions?We have compiled a library of frequently asked questions and their respective answers under our Fi-Shock® FAQs section